DisplayPort Over CAT6 Extender Kit Transmitter Receiver 4k Poc
ITCurry #: N4836585 | Article #: B127A-111-BDTD-
SchermGeheugenGewichtProcessorHard DiskSSDSchermResolutieConnectiviteitGeheugenDesktopOSSchermTypeSnelheid ZwartSnelheid KleurenModelSnelheidVorm factorInterne / ExterneAantal poortenUplink / mediaMontage
- Alles bekijken
Bundles
Verwante producten
Product Informatie
DisplayPort 1.2a Extender Kit Ideal for Digital Signage in Schools and Offices
This complete transmitter and transceiver system is recommended for video presentations in conference rooms, schools, trade shows, meeting facilities, houses of worship, retail settings, hotels and other digital signage applications where the source and display are farther apart than conventional A/V cables allow. The B127A-111-BDTD extends 4K signals from a DisplayPort source device to a DisplayPort monitor up to 230 feet (70.1 meters) away with zero latency via user-supplied Cat6 cabling.
Transmits Crystal-Clear 4K Video with 4:4:4 Color
The B127A-111-BDTD supports Ultra HD resolutions up to 3840 x 2160 (4K x 2K) at 30 Hz with 7.1-channel surround sound via the transceiver’s TOSLINK audio output. HDCP 2.2 compliance allows you to stream 4K Amazon and Netflix content with no complications. This extender kit also supports 4:4:4 chroma subsampling for top-level PC gaming or using your HDTV as a PC monitor. Built-in equalization allows you to fine-tune the image quality at the remote display.
Local HDMI Port on Transmitter Supports 4K @ 30 Hz Resolution
To monitor the video signal being extended to the transceiver, connect a 4K display to the transmitter’s local HDMI port with a user-supplied HDMI cable.
Built-In PoC Technology Provides Transceiver Power to Avoid Bulky External Power Bricks
Power over Cable (PoC) technology powers either the transmitter or transceiver over Cat6 cable. Connect the included power supply at either end to power the entire installation. LEDs on both the transmitter and transceiver will light up to indicate the system is receiving power and a signal is being transmitted. PoC lets you avoid the hassle of a bulky power brick and gives you the freedom to place the transceiver where needed without worrying about finding a nearby AC outlet.
Create a Daisy Chain to Achieve Even More Distance
This extender kit is capable of forming daisy-chain installations up to 920 feet (280.4 meters) from the transmitter by connecting additional B127A-110-BD transceivers (sold separately). Up to four total transceivers can be chained together, each capable of extending a 4K/30 Hz signal up to 230 feet per unit. The kit is also compatible with B127A-010-H signal booster (sold separately), which allows the signal, when used in a daisy chain, to be enhanced up to 1,090 feet (332.2 meters) total. Note
: B127A-010-H will only work when used in the first link of the daisy-chain installation.
Plug-and-Play Operation for Quick Setup and Immediate Use
The included transmitter and transceiver units work right out of the box with no software required. Mounting hardware is included for installing the transceiver on a wall, pole or 19-inch rack. Connect the transmitter to the source with a user-supplied DisplayPort cable (such as P580-Series). Then, connect the transceiver to the display with another user-supplied DisplayPort cable. Finally, connect the two units with user-supplied Cat6 patch cable (such as N202-Series cable).
TAA-Compliant for GSA Schedule Purchases
The B127A-111-BDTD is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.
Kenmerken | |
Soort | AV-zender & ontvanger |
Maximum resolutie | 3840 x 2160 Pixels |
Ondersteundende kabel types | Cat5, Cat5e, Cat6, HDMI |
Maximaal bereik | 70,1 m |
Audiosysteem | Multikanaal |
Extended display identification data (EDID) | Ja |
Audio-uitgangskanalen | 7.1 kanalen |
LED-indicatoren | Ja |
Ondersteunde video-modi | 480i, 480p, 720p, 1080i, 1080p, 2160p |
Ondersteunde grafische resoluties | 1280 x 720 (HD 720), 1920 x 1080 (HD 1080), 3840 x 2160 |
Snoerlengte | 1,38 m |
HDCP | Ja |
Materiaal | Metaal |
Kleurdiepte | 36 Bit |
3D | Ja |
Rack-montage | Ja |
Consumer Electronics Control (CEC)-ondersteuning | Ja |
HDCP versie | 1.4/2.2 |
Kleur van het product | Zwart |
Poorten & interfaces | |
Connectiviteitstechnologie | Bedraad |
Ethernet LAN | Ja |
RJ-45 invoer ports | 1 |
RJ-45 uitgang ports | 2 |
HDMI in | 1 |
DisplayPorts in | 1 |
DisplayPorts out | 1 |
Digitale audio, optische uitgang | 1 |
Aansluiting voor netstroomadapter | Ja |
Energie | |
AC-ingangsspanning | 100 - 240 V |
AC-ingangsfrequentie | 50 - 60 Hz |
Operating voltage | 24 V |
Stroom | 0.6 A |
Output current | 1 A |
Externe adapter | Ja |
Eisen aan de omgeving | |
Bedrijfstemperatuur (T-T) | 0 - 40 øC |
Temperatuur bij opslag | -15 - 50 øC |
Relatieve vochtigheid in bedrijf (V-V) | 0 - 85 procent |
Luchtvochtigheid bij opslag | 0 - 85 procent |
Warranty | |
Base Warranty | Non Non |
Gewicht en omvang | |
Receiver afmetingen (B x D x H) | 115 x 62,4 x 27 mm |
Receiver gewicht | 450 g |
Transmitter afmetingen (WxDxH) | 115 x 62,4 x 27 mm |
Transmitter gewicht | 450 g |
Verpakking | |
Aantal per verpakking | 1 stuk(s) |
Breedte verpakking | 260,1 mm |
Diepte verpakking | 164,1 mm |
Hoogte verpakking | 55,1 mm |
Gewicht verpakking | 560 g |
Type verpakking | Doos |
Inhoud van de verpakking | |
Inclusief AC-adapter | Ja |
Inbegrepen soorten voedingsstekkers | AU, EU, NA, UK |
Gebruikershandleiding | Ja |
Montage gereedschap | Ja |
Technische details | |
Land van herkomst | Taiwan |
Naleving van duurzaamheid | Ja |
Certificaten van naleving | CE, REACH, RoHS |
Logistieke gegevens | |
(Buitenste) hoofdverpakking breedte | 573 mm |
(Buitenste) hoofdverpakking lengte | 273 mm |
(Buitenste) hoofdverpakking hoogte | 175 mm |
(Buitenste) hoofdverpakking brutogewicht | 5,9 kg |
Hoeveelheid per (buitenste) hoofdverpakking | 10 stuk(s) |
GTIN (EAN/UPC)-nummer (buitenste) hoofdverpakking | 10037332263961 |