TRIPP LITE Smartpro Medical Grade 1kva 230v Line Interactive Tower UPS Extended-run Full Isolation
ITCurry #: 57903642 | Article #: SMX1200XLHG-
ScreenMemoryWeightProcessorHard DiskSSDScreenResolutionConnectivityMemoryCaseOSScreenTypeSpeed BlackSpeed ColourModelProcessor SpeedForm FactorInternal / ExternalPort CountUplink / mediaMounting
- View All Specs
Bundles
Related products
Product Information
The SMX1200XLHG medical-grade UPS system provides dependable battery backup and is fully compliant with UL 60601-1 regulations when plugged into a hospital-grade outlet, making it ideal for use in patient care vicinities. The 1kVA/750W capacity provides up to 27.5 minutes of runtime for a half load or 11 minutes for a full load, so you can work through short power failures and perform an orderly system shutdown in a prolonged blackout.
Built-in line-interactive voltage regulation corrects brownouts as low as 155V and overvoltages as high as 274V to normal 230V nominal output, without drawing battery power. The SMX1200XLHG’s built-in isolation transformer with Faraday shield offers full isolation and removes common mode noise while maintaining full AC surge suppression in all modes. Cumulative leakage current of all connected equipment is less than 100 microamps.
This UPS system features six IEC320 C13 hospital-grade outlets and has a hospital-grade IEC320 C14 plug on a 15-centimeter (six-inch) dongle. All six outlets provide both backup protection and surge protection, rated to 340 joules.
The SMX1200XLHG also features diagnostic LEDs, as well as a USB port and a DB9 serial port that work with included PowerAlert® software for safe, unattended system shutdown in the event of a prolonged power failure.
This UPS contains a lead acid battery designed to be connected continuously to an AC power source, except during brief power outages. It is not intended for frequent charge/discharge cycles, such as mobile cart applications where the UPS is often disconnected from the power source. Using the SMX1200XLHG in this type of application will void the battery warranty.
| Features | |
| Output power capacity | 1 kVA |
| Output power | 750 W |
| Input operation voltage (min) | 230 V |
| Input operation voltage (max) | 230 V |
| Input frequency | 50/60 Hz |
| Output operation voltage (min) | 230 V |
| Output operation voltage (max) | 230 V |
| Maximum current | 10 A |
| Surge energy rating | 340 J |
| EMI/RFI noise filtering | Yes |
| Surge protection | Yes |
| Power protection features | Over voltage, Under voltage |
| Audible alarm(s) | Yes |
| Country of origin | China |
| Ports & interfaces | |
| AC outlet types | C13 coupler |
| Power plug | C14 coupler |
| AC outlets quantity | 6 AC outlet(s) |
| Battery | |
| Typical backup time at full load | 11 min |
| Typical backup time at half load | 27.5 min |
| Battery recharge time | 4.5 h |
| Hot-swap battery | Yes |
| Cold start | Yes |
| Design | |
| Form factor | Tower |
| Product colour | White |
| LED indicators | Yes |
| Certification | CE, IEC 60601-1 |
| Operational conditions | |
| Operating temperature (T-T) | 0 - 40 øC |
| Storage temperature (T-T) | -15 - 50 øC |
| Operating relative humidity (H-H) | 0 - 95% |
| Weight & dimensions | |
| Width | 190.5 mm |
| Depth | 231 mm |
| Height | 323 mm |
| Weight | 20.6 kg |
| Package width | 309.9 mm |
| Package depth | 339.9 mm |
| Package height | 469.9 mm |
| Package weight | 22.1 kg |
| Logistics data | |
| Harmonized System (HS) code | 85078000 |
| Master (outer) case width | 309.9 mm |
| Master (outer) case length | 339.9 mm |
| Master (outer) case height | 469.9 mm |
| Master (outer) case gross weight | 22.1 kg |
| Products per master (outer) case | 1 pc(s) |
| Other features | |
| Interface | USB; DB9 |
| Warranty | |
| Base Warranty | Non Non |