DM Essentials 4K Transmitter - HDMI/ RS-232 and IR Signal Extension over CATX Cable
ITCurry #: W4882137 | Article #: HD-TXC-4KZ-101-
ScreenMemoryWeightProcessorHard DiskSSDScreenResolutionConnectivityMemoryCaseOSScreenTypeSpeed BlackSpeed ColourModelProcessor SpeedForm FactorInternal / ExternalPort CountUplink / mediaMounting
- View All Specs
Bundles
Related products
Product Information
The HD-TXC-4KZ-101 is a DM® Essentials 4K60 4:4:4 transmitter designed to interoperate with a DM® Essentials receiver or DMPS Essentials switcher for the transmission of HDMI®, RS-232, and IR signals. A CAT5e or higher twisted pair cable (Crestron DM-CBL-8G or DM-CBL-ULTRA sold separately) is needed to connect the HD-TXC-4KZ-101 to the DM Essentials receiver or DMPS Essentials switcher. For 1080p, WUXGA, and 2K signals, a cable length of up to 230 ft (70 m) is supported. For UHD and 4K signals, a cable length of up to 130 ft (40 m) is supported.
Interoperability with a DM Essentials Receiver or DMPS Essentials Switcher
The DM Essentials output port of the HD-TXC-4KZ-101 must be connected to a DM Essentials input port of a DM Essentials receiver or DMPS Essentials switcher. Examples of supported DM Essentials 4K60 4:4:4 receivers are the HD-RXC-4KZ-101 and HD-RXCA-4KZ-101. Supported DMPS Essentials switchers are the HD-PS622, HD-PS621, HD-PS402, HD-PS401, and HD-RX-4K-210-C-E.
Note: When paired with an HD-RX-4K-210-C-E(-POE), the transmitter cannot provide power to the receiver. Power must be connected to the HD-RX-4K-210-C-E(-POE) only.
The HD-TXC-4KZ-101 can be configured and controlled only when it is used with a DMPS Essentials switcher. The web interface of the switcher can be used to configure the HD-TXC-4KZ-101. In addition, control system programming and .AV Framework™ software support of the HD-TXC-4KZ-101 is hosted by the switcher.
4K60 4:4:4 and HDR Support
The HD-TXC-4KZ-101 supports video resolutions up to 4K60 with 4:4:4 color sampling. HDR10, HDR10+, and Dolby Vision® video formats are also supported.
Compact, Surface-Mountable Design
Compact in design, the HD-TXC-4KZ-101 can be mounted onto a flat surface such as the underside of a table, behind a credenza, or inside a podium. It can also be attached to a single rack rail in the back of an equipment cabinet. The HD-TXC-4KZ-101 can receive power from the included power pack or from the remote DM Essentials receiver or DMPS Essentials switcher.
Features | |
Type | AV receiver |
Maximum resolution | 4096 x 2160 pixels |
Cable types supported | Cat5e |
Maximum transfer distance | 70 m |
High Dynamic Range (HDR) supported | Yes |
High Dynamic Range (HDR) technology | Dolby Vision, High Dynamic Range 10 (HDR10), High Dynamic Range 10+ (HDR10 Plus) |
Maximum refresh rate | 60 Hz |
IR pass-through | Yes |
HDCP pass-through | Yes |
RS-232 pass-through | Yes |
LED indicators | Activity, Link, Power |
Supported graphics resolutions | 1920 x 1080 (HD 1080), 2560 x 1600 (WQXGA), 3840 x 2160, 4096 x 2160 |
Audio formats supported | DTS, LPCM |
HDCP | Yes |
Material | Metal, Polycarbonate (PC) |
Colour depth | 12 bit |
Rack mounting | Yes |
Frame rate | 60 fps |
HDCP version | 2.3 |
Product colour | White |
Ports & interfaces | |
Connectivity technology | Wired |
Ethernet LAN | Yes |
RJ-45 input ports | 1 |
Number of HDMI outputs | 1 |
Power | |
Power source type | AC |
AC input voltage | 100 - 240 V |
Current | 2.5 A |
Operational conditions | |
Operating temperature (T-T) | 0 - 40 øC |
Operating relative humidity (H-H) | 20 - 90% |
Weight & dimensions | |
Width | 106 mm |
Depth | 27 mm |
Height | 106 mm |
Weight | 338 g |
Packaging content | |
Cables included | UTP |
IR extender included | Yes |
IR emitter included | Yes |
Mounting brackets included | Yes |
Technical details | |
Compliance certificates | CE, Federal Communications Commission (FCC) |
Warranty | |
Base Warranty | Non Non |