Dwr Series Pivoting Wall Rack Dwr-10-22
ITCurry #: W3842128 | Article #: DWR-10-22-
SchermGeheugenGewichtProcessorHard DiskSSDSchermResolutieConnectiviteitGeheugenDesktopOSSchermTypeSnelheid ZwartSnelheid KleurenModelSnelheidVorm factorInterne / ExterneAantal poortenUplink / mediaMontage
- Alles bekijken
Bundles
Verwante producten
Product Informatie
EIA compliant 19” wall mount rack shall be Middle Atlantic Products model # DWR-10-22. Overall dimensions shall be 23.4" W x 24-1/2" H x 22.3" D. Weight capacity shall be 200 lbs. Tool-Free Quick-Mount™ system enables one-person installation. Useable depth shall be 20” and shall extend into the back pan 3.5”. Center section and back pan shall be 16-gauge steel, phosphate pre-treated and finished in a black textured powder coat. Rackrail shall be constructed of 11-gauge steel with tapped 10-32 mounting holes in universal EIA spacing with black e-coat finish and marked rackspaces. Rack shall be constructed to swing open for component cabling access, center section shall pivot for either left or right opening. Rack shall have a rear knockout panel with 1/2”, 3/4”, 1", 1-1/2”, 2” and 3” electrical knockouts installed in base, and a rear knockout panel with 1/2”, 3/4”, 1”, 1-1/2”, 2” and 3” electrical knockouts, four Decora® cutouts, and BNC knockouts for UHF/VHF antennas installed in top. Large laser knockout on back pan shall have a 12-1/2” x 12-1/2” cutout for electrical pull-box. Fan knockouts on top and bottom shall allow for installation of up to four 4-1/2" fans. Rack shall have 2” knockouts, 4” knockouts for Wiremold 4000® Series raceways, and knockouts for UCP Series universal connector panels on the side. Top, bottom and sides shall feature vertical vent pattern. DWR Series enclosures shall satisfy the 2007 & 2010 CBC; 2006, 2009 & 2012 IBC; ASCE 7-05 (2005 Edition) & ASCE 7-10 (2010 Edition) and the 2006 & 2009 editions of NFPA 5000 for use in areas of high seismicity, Seismic Use Group III, Zone 4 or Seismic Design Category (SDC) “D” with lateral force requirements for protecting 140 lbs. of essential equipment in locations with the highest level of seismicity and top floor or rooftop installations with an Importance factor (Ip) of 1.5 when used with DWRSR-ZL Latch. Rack shall be UL Listed in the US and Canada. Rack shall be GREENGUARD Indoor Air Quality Certified for Children and Schools. Rack shall comply with the requirements RoHS EU Directive 2002 / 95 / EC. Rack shall be manufactured by an ISO 9001 and ISO 14001 registered company. Rack shall be warrantied to be free from defects in materials or workmanship under normal use and conditions for the lifetime of the rack.
| Kenmerken | |
| Rackcapaciteit | 10U |
| Soort | Wandrek |
| Maximale gewichtscapaciteit | 91 kg |
| Kleur van het product | Zwart |
| Materiaal | Staal |
| Frame type | Gesloten |
| Certificering | ASCE: 7-10, Greenguard, CSA, UL Listing No: E313734 |
| Warranty | |
| Base Warranty | Non Non |
| Gewicht en omvang | |
| Breedte | 594,4 mm |
| Diepte | 566,4 mm |
| Hoogte | 623,9 mm |
| Binnenste diepte | 50,8 cm |
| Inner hoogte | 44,5 cm |
| Verpakking | |
| Gewicht verpakking | 37,6 kg |
| Technische details | |
| Certificaten van naleving | RoHS |
| Logistieke gegevens | |
| Code geharmoniseerd systeem (HS) | 85381000 |