DM Lite 4K Transmitter - USB-C DisplayPort - Signal Extension over CATX Cable
ITCurry #: W4882079 | Article #: HD-TX-4KZ-111-
SchermGeheugenGewichtProcessorHard DiskSSDSchermResolutieConnectiviteitGeheugenDesktopOSSchermTypeSnelheid ZwartSnelheid KleurenModelSnelheidVorm factorInterne / ExterneAantal poortenUplink / mediaMontage
- Alles bekijken
Bundles
Verwante producten
Product Informatie
The HD-TX-4KZ-111 is a DM Lite® 4K60 4:4:4 transmitter designed to interoperate with a DM Lite® receiver or DMPS Lite™ switcher. The HD-TX-4KZ-111 includes a USB-C® input with DisplayPort™ Alt Mode capability, enabling the transmission of a DisplayPort AV signal. A CAT5e or higher twisted pair cable is used to connect the HD-TX-4KZ-111 to the DM Lite receiver or DMPS Lite switcher. For 1080p, WUXGA, and 2K signals, a cable length of up to 230 ft (70 m) is supported. For UHD and 4K signals, a cable length of up to 130 ft (40 m) is supported.
Interoperability with a DM Lite Receiver or DMPS Lite Switcher
The DM Lite output port of the HD-TX-4KZ-111 must be connected to a DM Lite input port of a DM Lite receiver or DMPS Lite switcher. Examples of supported DM Lite 4K60 4:4:4 receivers are the HD-RX-4KZ-101, HD-RXA-4KZ-101, HD-RXC-4KZ-101, and HD-RXCA-4KZ-101. Supported DMPS Lite switchers are the HD-PS621, HD-PS622, HD-PS401, HD-PS402, and HD-RX-4K-210-C-E(-POE).
Note: When paired with an HD-RX-4K-210-C-E(-POE), the transmitter cannot provide power to the receiver. Power must be connected to the HD-RX-4K-210-C-E(-POE) only.
The HD-TX-4KZ-111 can be configured and controlled only when it is used with a DMPS Lite switcher. The web interface of the switcher can be used to configure the HD-TX-4KZ-111. In addition, control system programming and .AV Framework™ software support of the HD-TX-4KZ-111 is hosted by the switcher.
4K60 4:4:4 and HDR Support
The HD-TX-4KZ-111 supports video resolutions up to 4K60 with 4:4:4 color sampling. HDR10, HDR10+, and Dolby Vision® video formats are also supported.
Compact, Surface-Mountable Design
Compact in design, the HD-TX-4KZ-111 can be mounted onto a flat surface such as the underside of a table, behind a credenza, or inside a podium. It can also be attached to a single rack rail in the back of an equipment cabinet. The HD-TX-4KZ-111 can receive power from the included power pack or from the remote DM Lite receiver or DMPS Lite switcher.
Kenmerken | |
Soort | AV-receiver |
Maximum resolutie | 4096 x 2160 Pixels |
Ondersteundende kabel types | Cat5e |
Maximaal bereik | 70 m |
HDR-ondersteuning | Ja |
High Dynamic Range (HDR)-technologie | Dolby Vision, High Dynamic Range 10 (HDR10), High Dynamic Range 10+ (HDR10 Plus) |
Maximale refresh snelheid | 60 Hz |
IR-doorvoer | Ja |
HDCP-passthrough | Ja |
RS-232-passthrough | Ja |
LED-indicatoren | Activiteit, Link, Stroom |
Ondersteunde grafische resoluties | 1920 x 1080 (HD 1080), 2560 x 1600 (WQXGA), 3840 x 2160, 4096 x 2160 |
Ondersteund audioformaat | DTS, LPCM |
HDCP | Ja |
Materiaal | Metaal, Polycarbonaat (PC) |
Kleurdiepte | 12 Bit |
Rack-montage | Ja |
Maximaal 30 frames per seconde | 60 fps |
HDCP versie | 2.3 |
Kleur van het product | Wit |
Poorten & interfaces | |
Connectiviteitstechnologie | Bedraad |
RJ-45 invoer ports | 1 |
Aantal HDMI-uitgangen | 1 |
Energie | |
Type stroombron | AC |
AC-ingangsspanning | 100 - 240 V |
Stroom | 2,5 A |
Eisen aan de omgeving | |
Bedrijfstemperatuur (T-T) | 0 - 40 øC |
Relatieve vochtigheid in bedrijf (V-V) | 20 - 90 procent |
Gewicht en omvang | |
Breedte | 106 mm |
Diepte | 27 mm |
Hoogte | 105 mm |
Gewicht | 339 g |
Inhoud van de verpakking | |
Meegeleverde kabels | UTP |
IR-extender inbegrepen | Ja |
IR-emitter inbegrepen | Ja |
Montagebeugels meegeleverd | Ja |
Technische details | |
Certificaten van naleving | CE, Federal Communications Commission (FCC) |
Warranty | |
Base Warranty | Non Non |