Industrial Managed PoE+ Switch 16 x 10/100/1000TX PoE+ Ports and 2 x 100/1000XSFP
ITCurry #: 13526181 | Article #: AT-IE210L-18GP-60-
ScreenMemoryWeightProcessorHard DiskSSDScreenResolutionConnectivityMemoryCaseOSScreenTypeSpeed BlackSpeed ColourModelProcessor SpeedForm FactorInternal / ExternalPort CountUplink / mediaMounting
- View All Specs
Bundles
Related products
Product Information
The Allied Telesis IE210L Series of Industrial-Lite Ethernet Gigabit Layer 2 switches are built for enduring performance at high ambient temperatures, making them ideal for indoor IoT applications and physical security.
The Allied Telesis IE210L Series are wire-speed Layer 2 switches for industrial-lite Ethernet applications. With Power over Ethernet Plus (PoE+), and support for high operating temperatures of up to 65°C, IE210L switches tolerate the harsh and demanding environments found in industrial deployments.
These high-performing, cost-effective switches provide network managers with several key features, including port-based VLANs, IEEE 802.1p, QoS, port trunking/link aggregation, port mirroring, priority queues, and IEEE 802.1x security support.
With support for up to 16K MAC addresses, the IE210L Series is the ideal option for integrating management into any network solution.
Device management is provided via an industry-standard CLI, web-based Graphical User Interface (GUI), SNMP, Telnet and SSH, as well as the Allied Telesis Autonomous Management Framework™ (AMF).
Powerful network management
AMF meets the increased management requirements of modern converged networks, automating many everyday tasks including configuration management. AMF has powerful centralized management features that manage a complete network as a single virtual device. The network can be expanded with plug-and-play simplicity, and network node recovery is fully zero-touch. AMF secure mode increases network security with management traffic encryption, authorization, and monitoring. AMF Guestnode allows third-party devices, such as security cameras, to be part of an AMF network.
Secure
Network security is guaranteed, with powerful control over network traffic types, secure management options, and other multi-layered security features built right into the IE210L.
Network Access Control (NAC) gives unprecedented control over user access to the network, in order to mitigate threats to network infrastructure.
Allied Telesis IE210L switches use 802.1x port-based authentication, in partnership with standards-compliant dynamic VLAN assignment, to assess a user’s adherence to network security policies and either grant access or offer remediation. Tri-authentication ensures the network is only accessed by known users and devices, while secure access is also available for guests.
Security from malicious network attacks is provided by a comprehensive range of features, such as DHCP snooping, STP root guard, BPDU protection and Access Control Lists (ACLs). Each of these can be configured to perform a variety of actions upon detection of a suspected attack.
Network protection
Advanced storm protection features include bandwidth limiting, policy-based storm protection and packet storm protection.
Network storms are often caused by cabling errors that result in a network loop. IE210L switches provide features to detect loops as soon as they are created. Loop detection and thrash limiting take immediate action to prevent network storms.
Network resiliency
The convergence of network services in the Enterprise has led to increasing demand for highly-available networks with minimal downtime. The IE210L Series supports highly-stable and reliable network switching with a recovery time of less than 50ms.
You can customize the IE210L with the most appropriate mechanism and protocol to prevent network connection failure. Choices include Allied Telesis Ethernet Protection Switched Ring (EPSRing™), and the standard ITU-T G.8032.
Future-proof
The IE210L switches are Software-Defined Networking (SDN) ready and are able to support OpenFlow v1.3.
| Management features | |
| Switch type | Managed |
| Switch layer | L2 |
| Quality of Service (QoS) support | Y |
| Web-based management | Y |
| Traffic classification | Y |
| ARP inspection | Y |
| Configuring Location Settings (CLI) | Y |
| System event log | Y |
| MIB support | Comprehensive SNMP |
| Ports & interfaces | |
| Basic switching RJ-45 Ethernet ports quantity | 16 |
| Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
| Gigabit Ethernet (copper) ports quantity | 16 |
| SFP module slots quantity | 2 |
| Power connector | AC-in jack |
| Network | |
| Networking standards | IEEE 802.1Q, IEEE 802.1ad, IEEE 802.1v, IEEE 802.2, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z |
| 10G support | N |
| Copper ethernet cabling technology | 10BASE-T, 100BASE-FX, 100BASE-T, 1000BASE-LX, 1000BASE-SX, 1000BASE-T |
| Port mirroring | Y |
| Full duplex | Y |
| Policy-based routing | Y |
| Flow control support | Y |
| Link aggregation | Y |
| Spanning tree protocol | Y |
| VLAN support | Y |
| Virtual LAN features | Policy-based VLAN, VLAN Identifier ( VLAN ID) |
| Number of VLANs | 2048 |
| Data transmission | |
| Switching capacity | 36 Gbit/s |
| Forwarding rate | 26.8 Mpps |
| MAC address table | 16000 entries |
| Latency (10-100 Mbps) | 56 æs |
| Latency (1 Gbps) | 7.9 æs |
| Latency (10 Gbps) | 3.4 æs |
| Number of queues | 8 |
| Static route | Y |
| Jumbo frames support | Y |
| Jumbo frames | 10000 |
| Security | |
| DHCP features | DHCP client, DHCP relay, DHCP server, DHCP snooping, DHCPv6 client, DHCPv6 relay |
| Access Control List (ACL) | Y |
| IGMP snooping | Y |
| Security algorithms | 802.1x RADIUS, HTTPS, MD5, PEAP, SSH, SSH-2, SSL/TLS, TTLS |
| MAC address filtering | Y |
| SSH/SSL support | Y |
| Loop protection | Y |
| BPDU filtering/protection | Y |
| Authentication | MAC-based authentication, Port-based authentication, Web-based authentication |
| Authentication type | IEEE 802.1x, Network Access Control (NAC), RADIUS |
| MAC address entries | Blackhole MAC address entries |
| Multicast features | |
| Multicast support | Y |
| Multicast MAC address table | 512 entries |
| Multicast Listener Discovery (MLD) snooping | MLDv1 and v2 |
| Design | |
| Rack mounting | Y |
| Stackable | Y |
| Product colour | Grey |
| LED indicators | Y |
| Electromagnetic compatibility | EN55032 class A, FCC class A, VCCI class A, ICES-003 class A, EN55024, EN61000-3-2 (harmonic), EN61000-3-3 (flicker) |
| Certification | UL, cUL, UL60950-1, CAN/CSA-C22.2 No. 60950-1-03, EN60950-1, EN60825-1, AS/NZS 60950.1 |
| Performance | |
| Memory type | DDR3-SDRAM |
| Internal memory | 512 MB |
| Flash memory | 128 MB |
| Noise level | 33 dB |
| Power | |
| Power supply included | Y |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Input current | 4.2 A |
| Power consumption (max) | 21 W |
| Power over Ethernet (PoE) | |
| Power over Ethernet (PoE) | Y |
| Power over Ethernet (PoE) ports quantity | 16 |
| Power over Ethernet plus (PoE+) ports quantity | 8 |
| Power over Ethernet (PoE) power per port | 15 W |
| Total Power over Ethernet (PoE) budget | 247 W |
| Operational conditions | |
| Operating temperature (T-T) | 0 - 65 øC |
| Storage temperature (T-T) | -30 - 70 øC |
| Operating relative humidity (H-H) | 5 - 95% |
| Storage relative humidity (H-H) | 5 - 95% |
| Operating altitude | 0 - 3048 m |
| Heat dissipation | 169 BTU/h |
| Weight & dimensions | |
| Width | 341 mm |
| Depth | 231 mm |
| Height | 44 mm |
| Weight | 3 kg |
| Packaging data | |
| Package width | 430 mm |
| Package depth | 360 mm |
| Package height | 150 mm |
| Package weight | 4.35 kg |
| Logistics data | |
| Harmonized System (HS) code | 85176990 |
| Warranty | |
| Base Warranty | Non Non |