Wbe665s - Be22000 12-stream Wi-Fi 7 Triple-radio Nebulaflex Pro Ruggedized Access Point
ITCurry #: 62306118 | Article #: WBE665S-EU0102F-
ScreenMemoryWeightProcessorHard DiskSSDScreenResolutionConnectivityMemoryCaseOSScreenTypeSpeed BlackSpeed ColourModelProcessor SpeedForm FactorInternal / ExternalPort CountUplink / mediaMounting
- View All Specs
Bundles
Related products
Product Information
High-capacity WiFi 7 for high-pressure sites
The WBE665S is a BE22000 (22Gbps), 12-stream, triple-radio WiFi 7 access point (AP) with an internal 120-degree wide-angle smart antenna, built for tough environments. Its IP67-rated design resists dust, water and extreme temperatures from -40°C to 70°C, making it ideal for industrial sites, warehouses, stadiums, outdoor campuses and city WiFi.
With WiFi 7 Multi-Link Operation (MLO) and smart adaptive antennas, it delivers higher speeds, lower latency and more stable connections in high-density areas.
Dual 10GbE uplinks provide flexible, high-capacity connectivity for both long-distance fiber and PoE++ Ethernet deployments. A built-in indoor/outdoor mode ensures 6GHz compliance, while NebulaFlex Pro lets you manage the AP in cloud, controller or standalone modes – giving you powerful, reliable WiFi wherever you need it.
Advanced WiFi 7 tech that thrives and adapts to its environment… now that’s smart.
The Zyxel WBE665S wireless AP features a 120-degree ultra-wide smart antenna that focuses wireless energy where it’s needed most, automatically adjusting signal patterns in real-time. This optimizes coverage, reduces interference and maintains stable connections. By adapting to environment and connected devices, it ensures consistent, high-speed performance across demanding deployment areas.
Built on a 12-stream, tri-radio WiFi 7 design, the WBE665S delivers up to 22Gbps* of combined wireless capacity. MLO provides faster speeds, lower latency and more reliable connectivity, making it ideal for high-density, mission-critical deployments.
Tough enough for anywhere.
Fast enough for everywhere.
The WBE665S is built for demanding environments. Its IP67-rated enclosure protects against dust, water, humidity and extreme temperatures, making it ideal for industrial sites, warehouses, outdoor campuses and transport hubs. It delivers reliable, consistent connectivity even in challenging conditions.
A high-speed 10G SFP+ fiber port supports long-distance installations beyond the limits of copper Ethernet, providing stable, high-capacity connections with minimal signal loss. The result is fast, dependable WiFi across large or complex deployments.
| Features | |
| 2.4 GHz | Yes |
| 5 GHz | Yes |
| 6 GHz | Yes |
| Maximum data transfer rate | 22000 Mbit/s |
| Maximum data transfer rate (2.4 GHz) | 1376 Mbit/s |
| Maximum data transfer rate (5 GHz) | 8646 Mbit/s |
| Maximum data transfer rate (6 GHz) | 11530 Mbit/s |
| Ethernet LAN data rates | 1000,2500,10000 Mbit/s |
| Networking standards | IEEE 802.11be, IEEE 802.11ax, IEEE 802.11ac, IEEE 802.11h, IEEE 802.11g, IEEE 802.11a, IEEE 802.11b |
| MIMO | Yes |
| MIMO type | Multi User MIMO |
| Wi-Fi Multimedia (WMM)/(WME) | Yes |
| Fast roaming | Yes |
| VLAN support | Yes |
| Wireless meshing | Yes |
| Band steering | Yes |
| Cellular Coexistence Filter (CCF) | Yes |
| Receiver sensitivity | -104 dBm |
| Security | |
| Auto Wireless Distribution System (WDS) | Yes |
| Remote Authentication Dial-In User Service (RADIUS) | Yes |
| Management features | |
| Command-line interface (CLI) | Yes |
| Access point management | L2-isolation, MAC filtering, Rogue AP detection |
| Cloud-managed | Yes |
| Firmware upgradeable | Yes |
| Ports & interfaces | |
| Ethernet LAN (RJ-45) ports | 1 |
| DC-in jack | Yes |
| Power | |
| Power over Ethernet (PoE) | Yes |
| DC voltage range | 24 - 48 V |
| Design | |
| Product colour | White |
| International Protection (IP) code | IP67 |
| Antenna | |
| Antenna type | Internal |
| Antenna gain level (max) | 6 dBi |
| Certificates | |
| Certification | ETSI EN 300 328 ETSI EN 301 893 ETSI EN 303 687 EN 301 489-1 EN 301 489-17 EN55032 EN55035 EN61000-3-2/-3 EN60601-1-2 EN 62368-1 IEC 62368-1 |
| Weight & dimensions | |
| Width | 410 mm |
| Depth | 410 mm |
| Height | 110 mm |
| Weight | 4.96 kg |
| Packaging data | |
| Package width | 564.5 mm |
| Package depth | 535.5 mm |
| Package height | 176.5 mm |
| Package weight | 8.1 kg |
| Packaging content | |
| Quantity per pack | 1 pc(s) |
| Mounting kit | Yes |
| Operational conditions | |
| Operating relative humidity (H-H) | 10 - 90% |
| Operating temperature (T-T) | -40 - 70 øC |
| Storage temperature (T-T) | -40 - 70 øC |
| Storage relative humidity (H-H) | 10 - 90% |
| Warranty | |
| Base Warranty | Non Non |