HDD Enclosure With Uasp 3.5in USB 3.0 External SATA 3 SSD
ITCurry #: 75646000 | Article #: S3510BMU33-
ScreenMemoryWeightProcessorHard DiskSSDScreenResolutionConnectivityMemoryCaseOSScreenTypeSpeed BlackSpeed ColourModelProcessor SpeedForm FactorInternal / ExternalPort CountUplink / mediaMounting
- View All Specs
Bundles
Related products
Product Information
The S3510BMU33 Black USB 3.0 Hard Drive Enclosure with UASP lets you connect a 3.5in SATA III hard drive (HDD) through an available USB port. The enclosure delivers optimal performance with a USB 3.0 connection, but is backward compatible with USB 2.0/1.1 host connections as well.
Enhanced with UASP (USB Attached SCSI Protocol), this 3.5" SATA III enclosure performs up to 70% faster than conventional USB 3.0 when paired with a UASP-enabled host controller. Using a more efficient protocol than the traditional USB BOT (Bulk-Only Transport), UASP reduces latency, significantly increasing transfer speeds and reducing processor usage to utilize the full potential of your SATA III hard drives. See our UASP testing results below for further details.
With support for SATA I/II/III, and large capacity drives (tested up to 4TB) this HDD enclosure is compatible with virtually any 3.5in SATA hard drive, and can greatly increase the storage/backup capabilities of your computer.
The USB 3.0/SATA III enclosure features high quality aluminum construction, ensuring durability.
Improved Performance with UASP
UASP is supported in Windows 8, Mac OSX (10.8 or above), and Linux. In testing UASP performs with a 70% faster read speed and 40% faster write speed over traditional USB 3.0 at peak performance.
At the same peak in testing UASP also shows an 80% reduction in required processor resources.
Testing results were obtained using an Intel® Ivy Bridge system, a UASP enabled StarTech.com enclosure, and a SATA III solid state drive.
The StarTech.com Advantage
- 70% Faster than traditional USB 3.0, with UASP Transfer Protocol
- Maximum durability, with aluminum housing
| Storage | |
| Number of storage drives supported | 1 |
| Storage drive size | 3.5" |
| Supported storage drive interfaces | Serial ATA, Serial ATA II, Serial ATA III |
| Hot-swap | Yes |
| Maximum storage capacity | 4 TB |
| Ports & interfaces | |
| USB connectivity | Yes |
| USB version | 3.2 Gen 1 (3.1 Gen 1) |
| USB connector type | USB Type-B |
| USB connector gender | Female |
| USB ports quantity | 1 |
| Design | |
| Product type | HDD enclosure |
| Product colour | Black |
| Material | Aluminium, Plastic |
| LED indicators | Activity, Power |
| Performance | |
| Data transfer rate | 5 Gbit/s |
| Chipset | ASMedia - ASM1053E |
| Plug and Play | Yes |
| Power | |
| External power adapter | Yes |
| Compatible power plug types | EU, UK, US |
| AC adapter input voltage | 100 - 240 V |
| AC adapter input current | 0.6 A |
| AC adapter output voltage | 12 V |
| AC adapter output current | 2 A |
| System requirements | |
| Windows operating systems supported | Yes |
| Operational conditions | |
| Operating temperature (T-T) | 0 - 40 øC |
| Storage temperature (T-T) | -10 - 65 øC |
| Operating relative humidity (H-H) | 10 - 90% |
| Storage relative humidity (H-H) | 5 - 95% |
| Weight & dimensions | |
| Width | 31.4 mm |
| Depth | 191.5 mm |
| Height | 115.4 mm |
| Weight | 317 g |
| Package width | 225 mm |
| Package depth | 134 mm |
| Package height | 106 mm |
| Package weight | 787 g |
| Packaging content | |
| AC adapter included | Yes |
| Cables included | USB |
| Stand included | Yes |
| Screws included | Yes |
| Manual | Yes |
| Technical details | |
| Sustainability certificates | RoHS |
| Compliance certificates | RoHS |
| Logistics data | |
| Harmonized System (HS) code | 84733080 |
| Master (outer) case width | 470 mm |
| Master (outer) case length | 541 mm |
| Master (outer) case height | 291 mm |
| Products per master (outer) case | 20 pc(s) |
| Warranty | |
| Base Warranty | Non Non |