CE0128TB Switch (Limited Lifetime Warranty) L3 Managed 24 x 100/1000/10000 + 4 x 1 Gigabit / 10 Gigabit SFP+ rack-mountable
ITCurry #: M852KV88 | Article #: 7Z360011WW-
ScreenMemoryWeightProcessorHard DiskSSDScreenResolutionConnectivityMemoryCaseOSScreenTypeSpeed BlackSpeed ColourModelProcessor SpeedForm FactorInternal / ExternalPort CountUplink / mediaMounting
- View All Specs
Bundles
Related products
Product Information
Abstract
The Lenovo CE0128PB Switch is a 1/10 Gb Ethernet (GbE) switch with Power over Ethernet (PoE) that delivers a compact, high-density, cost-effective GbE solution for network environments where space and power are at a premium. Featuring a small, 1U footprint, this switch is designed for access-layer deployments in branches, retail and workgroup environments, and campus networks. It can also be used as a management network switch in the data center infrastructures.
This product guide provides essential pre-sales information on the CE0128PB switch, its key features and specifications, components and options, and configuration guidelines.
This guide is intended for technical specialists, sales specialists, sales engineers, IT architects, and other IT professionals who want to learn more about the CE0128PB switch and consider its use in IT solutions.
Introduction
The Lenovo CE0128PB Switch is a 1/10 Gb Ethernet (GbE) switch with Power over Ethernet (PoE) that delivers a compact, high-density, cost-effective GbE solution for network environments where space and power are at a premium. Featuring a small, 1U footprint, this switch is designed for access-layer deployments in branches, retail and workgroup environments, and campus networks. It can also be used as a management network switch in the data center infrastructures.
The CE0128PB switch offers 24x 10/100/1000BASE-T (RJ-45) fixed ports with Power over Ethernet (PoE) for powering attached network devices, such as such as telephones, video cameras, IEEE 802.11ac WLAN access points, and videophones. The switch also offers 4x SFP+ ports that support 1 GbE and 10 GbE optical transceivers, 10 GbE active optical cables (AOCs), and 10 GbE direct attach copper (DAC) cables. The switch supports a wide range of L2 and L3 features that provide performance, availability, security, and manageability for campus networks.
Did you know?
The CE0128PB switch can simultaneously deliver up to 15.4 watts of standards-based 802.3af Class 3 PoE to a maximum of 12 ports or 30 watts of standards-based 802.3at PoE+ to a maximum of 6 ports.
The CE0128PB switch supports the LLDP-Media Endpoint Discovery (LLDP-MED) protocol, enabling the switches to automatically discover Ethernet-enabled devices, determine their power requirements, and assign virtual LAN (VLAN) membership.
The CE0128PB switch supports stacking, enabling up to eight interconnected switch devices to be managed as a single logical device.
The CE0128PB switch supports AutoInstall, which enables a switch to automatically configure itself using the resources available on the network, without manual intervention.
Management features | |
Switch type | Managed |
Switch layer | L2+/L3 |
Quality of Service (QoS) support | Y |
Ports & interfaces | |
Basic switching RJ-45 Ethernet ports quantity | 24 |
Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
SFP+ module slots quantity | 4 |
Console port | RJ-45 |
Power connector | AC-in jack |
Network | |
10G support | Y |
Copper ethernet cabling technology | 100BASE-T |
Cable types supported | Cat5, Cat5e |
Port mirroring | Y |
Full duplex | Y |
IP routing | Y |
Policy-based routing | Y |
Routing entries | 512 |
Flow control support | Y |
Link aggregation | Y |
Spanning tree protocol | Y |
VLAN support | Y |
Virtual LAN features | Tagged VLAN |
Number of VLANs | 4093 |
Data transmission | |
Throughput | 95000000 Mpps |
MAC address table | 16384 entries |
Latency (1 Gbps) | 4 æs |
Latency (10 Gbps) | 2 æs |
Number of IP interfaces | 192 |
Jumbo frames support | Y |
Jumbo frames | 9216 |
Packet buffer memory | 1.5 MB |
Security | |
DHCP features | DHCP client, DHCP relay, DHCP server |
Access Control List (ACL) | Y |
Access Control List (ACL) IPv4 entries | 256 |
Access Control List (ACL) IPv6 entries | 256 |
Security algorithms | SNMP, SNMPv3, SSH |
SSH/SSL support | Y |
Authentication type | RADIUS |
Multicast features | |
Multicast support | Y |
Protocols | |
Management protocols | IPv4/IPv6 |
GARP VLAN Registration Protocol (GVRP) | Y |
Routing protocols | VRRP |
Design | |
Rack mounting | Y |
Stackable | Y |
Form factor | 1U |
Product colour | Black |
LED indicators | Y |
Airflow direction | Side-to-side airflow |
Number of fans | 3 fan(s) |
Certification | FCC Part 15, Class A; UL 60950-1 / UL 62368-1, ICES-003, Issue 6, Class A; CSA C22.2 60950-1 / CSA C22.2 62368-1, NOM-19, IEC 60950-1, RoHS, CE Mark, TUV-GS, EAC, CCC GB4943.1, GB/T9254, YD/T993, CECP CQC3140, VCCI-CISPR32:2016, Class A, BSMI CNS13438, Class A; CNS14336-1, KN32, Class A; KN35, AS/NZS CISPR 32 Class A, CB |
Performance | |
Physical stacking (units) | 8 |
Mean time between failures (MTBF) | 600000 h |
Power | |
Power supply included | Y |
Number of power supply units | 1 |
AC input voltage | 100 - 240 V |
AC input frequency | 50 - 60 Hz |
Power consumption (typical) | 260 W |
Power over Ethernet (PoE) | |
Power over Ethernet (PoE) | Y |
Power over Ethernet (PoE) ports quantity | 24 |
Power over Ethernet (PoE) power per port | 30 W |
Operational conditions | |
Operating temperature (T-T) | 0 - 50 øC |
Operating relative humidity (H-H) | 5 - 95% |
Operating altitude | 0 - 3000 m |
Weight & dimensions | |
Width | 441 mm |
Depth | 254 mm |
Height | 44 mm |
Weight | 3.7 kg |
Packaging data | |
Manual | Y |
Logistics data | |
Harmonized System (HS) code | 85176990 |
Warranty | |
Base Warranty | Non Non |