Emulex 10 Gigabit Ethernet Virtual Fabric Adapter II For Ibm System X Option
ITCurry #: 2550H173 | Article #: 49Y7950-
ScreenMemoryWeightProcessorHard DiskSSDScreenResolutionConnectivityMemoryCaseOSScreenTypeSpeed BlackSpeed ColourModelProcessor SpeedForm FactorInternal / ExternalPort CountUplink / mediaMounting
- View All Specs
Bundles
Related products
Product Information
Optimized network connectivity
The Emulex 10GbE Virtual Fabric Adapter (VFA) II for IBM System x is a high performance, dual-port network adapter for 10Gb Ethernet (10GbE) networks. It offers the benefits and flexibility of I/O convergence with a single end-to-end solution. An upgrade option (49Y4274) can be used to add support for storage networks using iSCSI or Fibre Channel over Ethernet (FCoE) with full protocol offload¹.
Superior 10Gb/s performance
The Emulex 10GbE VFA II for IBM System x achieves line rate 10Gb/s performance with support for TCP/IP stateless offloads and TCP Chimney Offload. TCP Chimney Offload reduces system processor utilization, provides increased system performance and reduces overall system power requirements.
Network convergence
The Emulex 10GbE VFA II for IBM System x provides the option to support FCoE, seamlessly converging Fibre Channel and Ethernet I/O while leveraging ten generations of proven Emulex Fibre Channel technology. By using a common infrastructure for Ethernet and storage networks, data centers can reduce capital expense (CAPEX) with savings of up to 30% for adapters and switches, and up to 80% for cables. Network convergence also reduces operational expense (OPEX)) for power and cooling by up to 40%. FCoE is fully compatible with existing Fibre Channel infrastructures to fully protect investments in storage, switches, management applications and administrative expertise.
Optimized for virtualization
The Emulex 10GbE VFA II for IBM System x offer the benefits and flexibility of an enhanced virtual NIC (vNIC) function, which enables bidirectional bandwidth management, dynamic bandwidth allocation and I/O convergence in a single end-to-end solution. Each port on the Emulex 10GbE VFA II card can support up to four vNICs per physical port. In addition, the Emulex 10GbE VFA II card supports Single Root I/O Virtualization (SR-IOV) which allows PCIe devices to appear as multiple virtual devices that can optimize I/O performance by providing direct I/O for virtual machines (VMs).
| Ports & interfaces | |
| Connectivity technology | Wired |
| Host interface | PCI Express |
| Interface | Fiber |
| Fiber ports quantity | 2 |
| Fiber optic connector | SFP+ |
| Network | |
| Maximum data transfer rate | 10000 Mbit/s |
| Networking standards | IEEE 802.1p, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3ae, IEEE 802.3x |
| Ethernet LAN data rates | 10,100,1000,10000 Mbit/s |
| Jumbo frames support | Yes |
| Design | |
| Internal | Yes |
| Chipset | Emulex BladeEngine 3 (BE3) |
| Hot-swap | Yes |
| Hot-Plug support | Yes |
| System requirements | |
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Weight & dimensions | |
| Width | 167.6 mm |
| Depth | 68.9 mm |
| Packaging data | |
| Quantity | 1 |
| Warranty | |
| Base Warranty | Non Non |
| Logistics data | |
| Harmonized System (HS) code | 85176990 |
| Other features | |
| Fiber Channel over Ethernet | Yes |